Carpets and under floor heating<\/h2>\n
\n<\/div>\n
The maximum tog value of a carpet to be laid over under floor heating is 2.5 tog (0.25 w\/m2k).
\nIn a timber floor system R = 0.00 includes a layer of 18 mm chipboard and then the
\n2.5 tog carpet is allowed as an overlay.<\/p>\n
The total resistance of the carpet at 2.5 tog and the chipboard at 1.05 tog is 3.55 tog (0.355 w\/m2k).<\/p>\n<\/div>\n<\/div>\n<\/div>\n
Wooden floors are the better choice!<\/strong><\/p>\n A 39 mm wood floor thickness = 0.2294W\/m2k. = 2.29 tog We have other installation options below that improve resistance saving to as low as 1.29 tog, increasing your energy efficiency.<\/p>\n<\/div>\n<\/div>\n<\/div>\n \n<\/div>\n 6mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 21 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 9mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 21 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 12mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 21 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 15mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 21 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 18mm plywood or chipboard bonded to screed with polyurethane adhesive.<\/p>\n Premium 21 mm plank fully bonded to the plywood or chipboard with D3 moisture resistant PVA. PVA is also required along the top of the tongues. Fitting over UFH in batten or joisted floor<\/p>\n Choose your substrate, 12mm plywood, 18 mm chipboard etc.<\/p>\n The substrate and the Premium plank in length should be laid at 90\u00ba to the joist. The substrate should be laid with staggered joints. Screw the substrate to the batten \/ joist making sure that all joints are structurally supported and then fully bond the Premium floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system. PVA is also required along the top of the tongues.<\/p>\n<\/div>\n Fitted over floated system UFH<\/p>\n The substrate should be laid with staggered joints floated 90\u00ba to the desired direction of the Premium flooring. Float the substrate over the UFH and then fully bond the Cathedral floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system.<\/p>\n \n<\/div>\n 6mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 9mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 12mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Premium 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 15mm plywood bonded to screed with polyurethane adhesive. 18mm plywood or chipboard bonded to screed with polyurethane adhesive. Fitting over UFH in batten or joisted floor<\/p>\n Choose your substrate, 12mm plywood, 18 mm chipboard etc.<\/p>\n The substrate and the Premium plank in length should be laid at 90\u00ba to the joist. The substrate should be laid with staggered joints. Screw the substrate to the batten \/ joist making sure that all joints are structurally supported and then fully bond the Premium floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system. PVA is also required along the top of the tongues.<\/p>\n<\/div>\n Fitted over floated system UFH<\/p>\n The substrate should be laid with staggered joints floated 90\u00ba to the desired direction of the Premium flooring. Float the substrate over the UFH and then fully bond the Cathedral floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system.<\/p>\n<\/div>\n<\/div>\n \n<\/div>\n 6mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Contract 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 9mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Contract 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 12mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Contract 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 15mm plywood bonded to screed with polyurethane adhesive.<\/p>\n Contract 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA. 18mm plywood or chipboard bonded to screed with polyurethane adhesive.<\/p>\n Contract 16 mm plank fully bonded to the plywood or chipboard with D3 moisture resistant PVA. PVA is also required along the top of the tongues. Fitting over UFH in batten or joisted floor<\/p>\n Choose your substrate, 12mm plywood, 18 mm chipboard etc.<\/p>\n The substrate and the Contract plank in length should be laid at 90\u00ba to the joist. The substrate should be laid with staggered joints. Screw the substrate to the batten \/ joist making sure that all joints are structurally supported and then fully bond the Contract floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system. PVA is also required along the top of the tongues.<\/p>\n<\/div>\n Fitted over floated system UFH<\/p>\n The substrate should be laid with staggered joints floated 90\u00ba to the desired direction of the Contract flooring. Float the substrate over the UFH and then fully bond the Vicarage floor to the substrate using PVA to bond wood to wood and Polyurethane to bond wood to Fermacell. Do not use liquid batten system.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/article>\n<\/div>\n
\nsaving the resistance of 1.26 tog compare with the carpet.<\/p>\n
\nCathedral Oak Plank
\n21 mm, 15 + 6<\/h2>\nOption A:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1588 W\/m2k. 1.58 tog<\/p>\n<\/div>\nOption B:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1764W\/m2k. 1.76 tog<\/p>\n<\/div>\nOption C:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1941 W\/m2k. 1.94 tog<\/p>\n<\/div>\nOption D:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.2117 W\/m2k. 2.11 tog<\/p>\n<\/div>\nOption E:<\/h3>\n
\nTotal resistance = 0.2294W\/m2k. 2.29 tog<\/p>\n<\/div>\nOption F:<\/h3>\n
Option G:<\/h3>\n
\n<\/div>\n<\/div>\nCathedral Oak Plank
\n16 mm, 10 + 6<\/h2>\nOption A:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1294 W\/m2k. 1.29 tog<\/p>\n<\/div>\nOption B:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1471 W\/m2k. 1.47 tog<\/p>\n<\/div>\nOption C:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1674 W\/m2k. 1.65 tog<\/p>\n<\/div>\nOption D:<\/h3>\n
\nPremium 16 mm plank fully bonded to the plywood with D3 moisture resistant PVA.
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1824 W\/m2k. 1.82 tog<\/p>\n<\/div>\nOption E:<\/h3>\n
\nPremium 16 mm plank fully bonded to the plywood or chipboard with D3 moisture resistant PVA. PVA is also required along the top of the tongues.
\nTotal resistance = 0.2000 W\/m2k. 2.0 tog<\/p>\n<\/div>\nOption F:<\/h3>\n
Option G:<\/h3>\n
\nVicarage Oak Plank
\n16 mm, 12 + 4<\/h2>\nOption A:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1294 W\/m2k. 1.29 tog<\/p>\n<\/div>\nOption B:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1471 W\/m2k. 1.47 tog<\/p>\n<\/div>\nOption C:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1674 W\/m2k. 1.65 tog<\/p>\n<\/div>\nOption D:<\/h3>\n
\nPVA is also required along the top of the tongues.
\nTotal resistance = 0.1824 W\/m2k. 1.82 tog<\/p>\n<\/div>\nOption E:<\/h3>\n
\nTotal resistance = 0.2000 W\/m2k. 2.0 tog<\/p>\n<\/div>\nOption F:<\/h3>\n
Option G:<\/h3>\n
\n